Pop Goes the Bezel

PERC finished machining the replacement tender backup light bezel ring, cast by Peter Grant. While it should have matched up exactly, they found it necessary to pull out the original brass pins and replace them with bolts, which isn't historical, but the ring fits very well. We need to get or fabricate tabs to hold in the headlight glass, then Peter will cast a replacement latch handle and service door. This should be done in the next week or two. 

To recap: The can body of the backup lamp was restored by Forrest Autobody of Winterport. Casting pattern was made by Bernie Perch of Minersville, Penn., using the remaining 4 inch fragment of the original bezel. Odd Duck Foundry of Orrington, cast the iron bezel ring with about five attempts that failed, but from which he perfected a technique. We got one! Penobscot Energy Recovery Corporation (PERC) also in Orrington, milled the bezel so it fits the can body.

MEC 470 Merchandise Available

There are seven of the 2017 "470 Calendars" remaining. If you want one, please let us know by emailing newenglandsteamcorp@gmail.com immediately. The calendars are $15 + $5 priority mail shipping. These are the last of the calendars!

Now available! Poster-size (24"x36") copies of the original American Locomotive Works print of 469 & 470 are now available. These first appeared in Mainline Modeler magazine. Rights to the content were granted to the C&OT&HS, who have granted NESCO permission to reproduce them for sale. Copies are $25 +$5 shipping. The prints are sharp enough to read details; perfect for live steam modelers! 470 finished service with some modifications, but these depict "as delivered" in 1924.

Also available! Something beautiful and almost unique! We have been given three of the chevron style and two of the rectangular plates, all etched in stainless steel, recognizing a donors participation in the restoration of the 470! Each plate is $25 + $5 shipping and handling. You can pay by PayPal or by check at our postal address. This is a nice way to post your support alongside you model layout, in your train room, or elsewhere. The supply is limited, so if you want one, please email your intent to order!

Some other unique NESCO items will be announced soon!

A Light and a Lift

An early Christmas present for the 470! Peter Grant (Odd Duck Foundry) used the patterns made by Bernard Perch (Project 113) to cast this replacement bezel ring for 470's tender backup light. Peter found a flask capable of holding the pattern and put supports across it. Earlier attempts could not support the weight of the sand, and fell out before casting could occur. This time he scored a good molding and with the application of scrap radiator, plumbing and Chevy manifold, he got the desired result. With the reconditioned backup light, services donated by Forrest Autobody (Winterport), the pattern from Mr. Perch (Minersville, Pa.), and casting by Odd Duck Foundry (Orrington, Maine), a piece of 470 has been replaced! 

Additionally, our CMO Leverett Fernald was able to negotiate donation of a used crane, in good condition, from Shawmut Equipment. This will be capable of lifting the tender, and frankly, most of the things for which we will need heavy lift capability. He is presently working out delivery to Washington Jct,, but the potential power to solve a number of lift problems is more than welcomed!

Rails in Waterville

On 9/22/16, Collie and Myron are shown removing fish plates and bolts from the display rails. Pretty ingenious too, using an adjustable wrench and a pipe to gain leverage, plus a couple shots of WD-40. Ron is shown removing rail anchors, using a spike puller and a sledge. While Ron and Myron raised rail, Collie and Dick whacked out the tie plates using hammers. Afterward, the four of them loaded the materials in Myron's truck for removal and re-use or scrap. It was amazing how dissolved the steel was where coal dust had settled under and alongside these heavy pieces of steel. The rails which once supported 470 on display, will now be used along the inspection and drop pit in her new home in Hancock.

$7,000 Donation

Directors of the Jacobs Family Foundation stopped by on Saturday morning and received a full tour of the 470 and the layout of the shop building and pit. After consideration of the outlined work schedule and transparency of the project, the foundation granted NESCO a donation of $7,000 towards construction of the pit. Combined with prospective funding and smaller donations which arrive regularly, we hope to have the pit cast during the early fall season. Additional funds will be used to erect the building which is presently on site. 

Donors can earmark their tax-deductible gifts to fund the tender restoration, the shop erection, or the boiler fund. 

The 470 Restoration is noted in the October issue of Railfan & Railroad Magazine (page 15), as well as the NRHS bulletin.

Tarp-Rite Building Delivered

The Tarp-Rite building has been delivered!

Once the locomotive's suspension and rods are free and the drop pit has been built, we will tackle its construction.

Thanks to Pleasant River Lumber for bringing their loader over to unload the trusses for us.

What's Next?

What's next for New England Steam Corporation and 470? We're taking a short break after three years of regular and intense labor to prep and move the 470. In a few weeks we'll start again. The drive rods must come off so 470 can easily be moved from Track 7. We wish to install a service and drop pit then reinstall the rail. After the pit goes in, the land will be graded and the Arch-Tarp shop building will be installed. Of course we would like to have this completed by year's end, however "we move at the speed of money."  Starting this fall, the tender trucks will be removed, disassembled, cleaned, checked for any issues, primed, painted, greased, and completed. The tender frame will be stripped of old paint, and like the trucks, completely renewed. That leaves the tender tank and coal bunker. This requires a complete replacement, although original handrails, grab irons, doors, and stoker motor will be reapplied. The tender is a big ticket item, and this is where your club or historical organization can play a significant role by donating funds specifically to the tender fund. This is major accomplishment on which we can get together and complete before 2018. Please consider making this your individual or group's charitable donation project. 

Maine Central 470 is in open view at Washington Junction yard, easily seen and photographed from the Downeast Rail Trail parking facility. If you are planning a trip to Mount Desert Island, please stop by the Downeast Scenic Railroad, ride the train and say "hello" to your locomotive, "The Mascot of Maine."

MEC 470 is Moved from Waterville to Ellsworth

In case you have not heard the news, Maine Central 470, "Mascot of Maine", and a project you very definitely have played a part in, was moved from the park display in Waterville, to Washington Junction yard of the Downeast Scenic Railroad, between August 8-9, 2016. On Wednesday, August 10th, we re-railed 470 onto live track once again. Thank you for your generosity, guidance, and encouragement, during this undertaking. 

The tender was re-railed and ceremonially coupled to DESR #1055, ex-Portland Terminal. We ran it slowly up the track and back, wearing away rust from the tender wheels, then coupled it to a flatcar with the pony truck, ash pan, and booster truck, to move it into the yard. The boiler will remain on the truck bed while it is stripped bare for inspection and the frame is being rebuilt.

The frame waited for unloading while one crane remained on the road. After the second crane arrived, the lift master and crane crews did their magic, placing 470 back on active track. A jammed journal or equalizer bar has kept the rear driver elevated. We are very much aware of the potential energy stored in the leaf springs, so we're treating it with respect. Note the center driver journal is still open.

During a sudden cloud burst, the drivers backed the 470 boiler into the yard and put her to bed. She's home and safe.

Last big surprise. We opened the booster truck for a quick examination and found it to be in pristine condition, with no rust or deterioration, and the oil appearing to be good. It's a great way to end the day.

WABI Television came out and did yet another story on the project. These people have been generous in their coverage, and it helps get the word out! The story can be found here: http://wabi.tv/2016/08/10/steam-locomotive-470-arrives-in-hancock/

We are going to take a short respite from work crews and catch our breath. Our next undertaking will be to arrange the parts in the yard, remove the drive rods, polish the driver axle bearings. We want to remove the rods so we are able to move 470 if it's required. Come visit New England Steam Corporation workers when you are in the Ellsworth-Mount Desert Island-Acadia National Park region. Also, ride the Downeast Scenic Railroad when you visit!

The priority for the fall season is to grade the land surrounding track 7, bring together $15,000 to construct a reinforced concrete drop it, and erect the Tarp-Rite shop building. The building is being delivered this week. The building and containers are covered by the Samuel Freeman Foundation grant. The pit requires additional funding. If donations continue to come in as hoped, we will look at having the drop/inspection pit cast before winter, then move on erecting the building.

With these objectives met, we will meet the goals of the Mystic Valley Railway Society grant to restore the tender frame, deck, trucks, and brakes, all of which are in good condition. In the interim, we continue to seek funds to replace 470's tender tank and coal bunker with a faithfully executed replica. This is a pretty heavy set of goals, but we'll take each in turn. With your continued support and interest in reviving this beautiful Pacific class locomotive, we feel sure we'll complete each stage. 

Please consider being part of that funding effort, and look forward to hearing more news in the near future. If your membership has lapsed over the last year, please consider renewing it. You are New England Steam Corporation.

Check out the New England Steam Corporation's and Kerri Marion's wonderful Maine Central 470 Restoration Facebook pages.

https://www.facebook.com/NewEnglandSteam/

https://www.facebook.com/MCSL470Restore?ref=hl

 

The site team, ready for the lift in Waterville. Back Row Standing (L-R): Myron Moody, Bill Alexander, Bob DeWachter, Ron Jenkins, Joe Foley, Paul van Steenberghe, Leverett Fernald, Peter Violette. Front Row Kneeling (L-R): Collie Moody, Richard Glueck, Tom Audet. Missing: Al Jenkins, Shawn Melvin, Dale Lehoux. (Photo by Kerri Marion)

Monday, August 8, 2016

Tuesday, August 9, 2016

Wednesday, August 10, 2016

Info for Monday's Lift of 470

MEC 470 is slated to be lifted on the morning of Monday, August 8, 2016.

People wishing to view the loading of 470 should plan to park elsewhere and walk to the viewing area. The Pan American Railroad parking lot will probably restricted to the use of employees only. The park where 470 is located will only be available to New England Steam Corporation workers, the cranes and trucks required to accomplish the move. Visitors vehicles are not permitted in the work area. There is no parking along College Avenue, per order of the police department. A portable toilet will be available to the workers and public. 

Rigging will begin once the cranes are positioned on Monday morning.

8/2/16 Work Session

To everyone's great joy, jacks placed under the smokebox hesitated a bit, then a parting line appeared and soon the whole boiler was off its supports. It went much more smoothly than we had thought it would, and was the apex in a heck of a lot of work going way back to last year in the winter! 

Around 1PM, Tom, Ron, Paul, Myron, placed a jack under the smokebox while Kerri and Dick took pictures. There was a little resistance, then a parting line, and the boiler raised about an inch off the cylinder saddle. We checked along the rest of the support and found the gap had occurred all along the frame. Kerri did an amazing job with her camera, and we recommend you check her Facebook blog to see them.

7/26/16 Work Session

An extremely productive day at the locomotive. Myron was able to save the furnace bearer plate in its entirety by burning out individual bolts. While the steel plate will be replaced, it is intact so a perfect copy can be made. This process involved work inside and outside the firebox. Myron was aided with help from Coll and our newest work crew member, James Noblini, a summer visitor from Massachusetts. James is not of an age where he can work directly on the locomotive, but he's policed a great deal of metal scraps from the surrounding area, and is a great tool handler. We're glad to have such a dedicated teen in our work force.

Using a jack and tools handed up to him by James, Myron was able to safely remove the stoker bearer casting, freeing the bearer plate from under.

Ron, Dick and James were able to safely remove the tender step castings from the tender frame, and get them labeled for storage. Not light work.

The CMO, concerned about overhead wire clearances above the tender, requested we cut down the coal slide. This was done carefully and placed inside the coal bunker for the move to Washington Junction. 

Another guest "torch man", John Webster, helped Myron and Ron with cutting the bolts which hold the cylinder steam delivery pipe collars.

470 Tender Drawings

These are accurate drawings, reflecting measurements and details taken directly from 470's tender. The drawings were custom made by member Keith Muldowney, who produced them for New England Steam Corporation. They may be reproduced for modeling but may not be copied for sale. Funding to rebuilding and refinish the tender frame, brake rigging and trucks, has been granted by the Mystic Railroad Society. A fund to replace the tender cistern (tank) and coal bunker is underway. The new tender will be an exact copy of the historic, built from the original pattern. Please contribute generously to help replace this essential part of the locomotive. Please label you contribution as being for the tender.

First Move

On Friday, July 15, 2016, the first major components of 470 were removed and moved to Washington Junction yard in Ellsworth, ME.

The cab was lifted onto the flatbed truck for moving to Washington Junction. The rear cab support plate will serve as a pattern for reproduction, as the original had two welds in it to begin with and an actual tear in 3/16 sheet metal. 

Next, the riggers cabled up the cross-compound pump, which weighs in at 1,400 pounds. Nothing was left to chance, and it was carried over to the truck and lowered. The pump will be rebuilt, hopefully in Maine, and hopefully as a donation or for the cost of parts alone.

The truck also carried several other huge castings from outside the firebox, and the booster pump. By 11:00 AM, most of the loading was completed, and the load was being re-adjusted. 

Most of this work has been completed with donated services and all of it by volunteers. The donations we receive are being used to purchase tools, acetylene and oxygen, and to pay for the moving of the boiler and frame, yet to come. We were recently saddled with an unexpected asbestos abatement fee, were it hadn't been removed by a crew in the 1980s. Still, today the locomotive is entirely clean, and done so to meet all safety requirements.

It will take about three weeks to get the movers and cranes in place. Expect the completion of 470's next trip to Washington Junction yard in the second week of August.

Asbestos Abatement Work

These are pictures of the asbestos abatement crew's setup at 470 yesterday. These guys have to wear containment suits inside these greenhouses!

Turbo Generator Update

AC Electric Corporation has made some progress on 470's Sunbeam Turbo Generator! Here's the recently rewound armature, ready to have the commutator slits cut next week.

Touch-a-Train 2016 Success

Thanks to everyone that came out for our Touch-A-Train event on Saturday, June 11, 2016! We drew in 730 people/families, and we had outstanding help and support from Downeast Scenic Railroad. Governor's also gave us the usual fine support they always offer, and PERC Waste to Energy provided both the whistle and set-up for a really unique but popular chance for kids to experience something truly memorable. Whited Ford also loaned us a Peterbilt truck which was a big hit!