NESCo News
and restoration updates
The Tarp-Rite building has been delivered!
Once the locomotive's suspension and rods are free and the drop pit has been built, we will tackle its construction.
Thanks to Pleasant River Lumber for bringing their loader over to unload the trusses for us.
What's next for New England Steam Corporation and 470? We're taking a short break after three years of regular and intense labor to prep and move the 470. In a few weeks we'll start again. The drive rods must come off so 470 can easily be moved from Track 7. We wish to install a service and drop pit then reinstall the rail. After the pit goes in, the land will be graded and the Arch-Tarp shop building will be installed. Of course we would like to have this completed by year's end, however "we move at the speed of money." Starting this fall, the tender trucks will be removed, disassembled, cleaned, checked for any issues, primed, painted, greased, and completed. The tender frame will be stripped of old paint, and like the trucks, completely renewed. That leaves the tender tank and coal bunker. This requires a complete replacement, although original handrails, grab irons, doors, and stoker motor will be reapplied. The tender is a big ticket item, and this is where your club or historical organization can play a significant role by donating funds specifically to the tender fund. This is major accomplishment on which we can get together and complete before 2018. Please consider making this your individual or group's charitable donation project.
Maine Central 470 is in open view at Washington Junction yard, easily seen and photographed from the Downeast Rail Trail parking facility. If you are planning a trip to Mount Desert Island, please stop by the Downeast Scenic Railroad, ride the train and say "hello" to your locomotive, "The Mascot of Maine."
In case you have not heard the news, Maine Central 470, "Mascot of Maine", and a project you very definitely have played a part in, was moved from the park display in Waterville, to Washington Junction yard of the Downeast Scenic Railroad, between August 8-9, 2016. On Wednesday, August 10th, we re-railed 470 onto live track once again. Thank you for your generosity, guidance, and encouragement, during this undertaking.
The tender was re-railed and ceremonially coupled to DESR #1055, ex-Portland Terminal. We ran it slowly up the track and back, wearing away rust from the tender wheels, then coupled it to a flatcar with the pony truck, ash pan, and booster truck, to move it into the yard. The boiler will remain on the truck bed while it is stripped bare for inspection and the frame is being rebuilt.
The frame waited for unloading while one crane remained on the road. After the second crane arrived, the lift master and crane crews did their magic, placing 470 back on active track. A jammed journal or equalizer bar has kept the rear driver elevated. We are very much aware of the potential energy stored in the leaf springs, so we're treating it with respect. Note the center driver journal is still open.
During a sudden cloud burst, the drivers backed the 470 boiler into the yard and put her to bed. She's home and safe.
Last big surprise. We opened the booster truck for a quick examination and found it to be in pristine condition, with no rust or deterioration, and the oil appearing to be good. It's a great way to end the day.
WABI Television came out and did yet another story on the project. These people have been generous in their coverage, and it helps get the word out! The story can be found here: http://wabi.tv/2016/08/10/steam-locomotive-470-arrives-in-hancock/
We are going to take a short respite from work crews and catch our breath. Our next undertaking will be to arrange the parts in the yard, remove the drive rods, polish the driver axle bearings. We want to remove the rods so we are able to move 470 if it's required. Come visit New England Steam Corporation workers when you are in the Ellsworth-Mount Desert Island-Acadia National Park region. Also, ride the Downeast Scenic Railroad when you visit!
The priority for the fall season is to grade the land surrounding track 7, bring together $15,000 to construct a reinforced concrete drop it, and erect the Tarp-Rite shop building. The building is being delivered this week. The building and containers are covered by the Samuel Freeman Foundation grant. The pit requires additional funding. If donations continue to come in as hoped, we will look at having the drop/inspection pit cast before winter, then move on erecting the building.
With these objectives met, we will meet the goals of the Mystic Valley Railway Society grant to restore the tender frame, deck, trucks, and brakes, all of which are in good condition. In the interim, we continue to seek funds to replace 470's tender tank and coal bunker with a faithfully executed replica. This is a pretty heavy set of goals, but we'll take each in turn. With your continued support and interest in reviving this beautiful Pacific class locomotive, we feel sure we'll complete each stage.
Please consider being part of that funding effort, and look forward to hearing more news in the near future. If your membership has lapsed over the last year, please consider renewing it. You are New England Steam Corporation.
Check out the New England Steam Corporation's and Kerri Marion's wonderful Maine Central 470 Restoration Facebook pages.
The site team, ready for the lift in Waterville. Back Row Standing (L-R): Myron Moody, Bill Alexander, Bob DeWachter, Ron Jenkins, Joe Foley, Paul van Steenberghe, Leverett Fernald, Peter Violette. Front Row Kneeling (L-R): Collie Moody, Richard Glueck, Tom Audet. Missing: Al Jenkins, Shawn Melvin, Dale Lehoux. (Photo by Kerri Marion)
MEC 470 is slated to be lifted on the morning of Monday, August 8, 2016.
People wishing to view the loading of 470 should plan to park elsewhere and walk to the viewing area. The Pan American Railroad parking lot will probably restricted to the use of employees only. The park where 470 is located will only be available to New England Steam Corporation workers, the cranes and trucks required to accomplish the move. Visitors vehicles are not permitted in the work area. There is no parking along College Avenue, per order of the police department. A portable toilet will be available to the workers and public.
Rigging will begin once the cranes are positioned on Monday morning.
To everyone's great joy, jacks placed under the smokebox hesitated a bit, then a parting line appeared and soon the whole boiler was off its supports. It went much more smoothly than we had thought it would, and was the apex in a heck of a lot of work going way back to last year in the winter!
Around 1PM, Tom, Ron, Paul, Myron, placed a jack under the smokebox while Kerri and Dick took pictures. There was a little resistance, then a parting line, and the boiler raised about an inch off the cylinder saddle. We checked along the rest of the support and found the gap had occurred all along the frame. Kerri did an amazing job with her camera, and we recommend you check her Facebook blog to see them.
New England Steam Corporation plans to move former Maine Central steam locomotive 470 from its display area in Waterville, Maine, to the restoration site at Washington Junction Yard, in Hancock, Maine (just north of Ellsworth), over August 8th - 10th. Please refer to the press release for further information regarding the move.
An extremely productive day at the locomotive. Myron was able to save the furnace bearer plate in its entirety by burning out individual bolts. While the steel plate will be replaced, it is intact so a perfect copy can be made. This process involved work inside and outside the firebox. Myron was aided with help from Coll and our newest work crew member, James Noblini, a summer visitor from Massachusetts. James is not of an age where he can work directly on the locomotive, but he's policed a great deal of metal scraps from the surrounding area, and is a great tool handler. We're glad to have such a dedicated teen in our work force.
Using a jack and tools handed up to him by James, Myron was able to safely remove the stoker bearer casting, freeing the bearer plate from under.
Ron, Dick and James were able to safely remove the tender step castings from the tender frame, and get them labeled for storage. Not light work.
The CMO, concerned about overhead wire clearances above the tender, requested we cut down the coal slide. This was done carefully and placed inside the coal bunker for the move to Washington Junction.
Another guest "torch man", John Webster, helped Myron and Ron with cutting the bolts which hold the cylinder steam delivery pipe collars.
These are accurate drawings, reflecting measurements and details taken directly from 470's tender. The drawings were custom made by member Keith Muldowney, who produced them for New England Steam Corporation. They may be reproduced for modeling but may not be copied for sale. Funding to rebuilding and refinish the tender frame, brake rigging and trucks, has been granted by the Mystic Railroad Society. A fund to replace the tender cistern (tank) and coal bunker is underway. The new tender will be an exact copy of the historic, built from the original pattern. Please contribute generously to help replace this essential part of the locomotive. Please label you contribution as being for the tender.
On Friday, July 15, 2016, the first major components of 470 were removed and moved to Washington Junction yard in Ellsworth, ME.
The cab was lifted onto the flatbed truck for moving to Washington Junction. The rear cab support plate will serve as a pattern for reproduction, as the original had two welds in it to begin with and an actual tear in 3/16 sheet metal.
Next, the riggers cabled up the cross-compound pump, which weighs in at 1,400 pounds. Nothing was left to chance, and it was carried over to the truck and lowered. The pump will be rebuilt, hopefully in Maine, and hopefully as a donation or for the cost of parts alone.
The truck also carried several other huge castings from outside the firebox, and the booster pump. By 11:00 AM, most of the loading was completed, and the load was being re-adjusted.
Most of this work has been completed with donated services and all of it by volunteers. The donations we receive are being used to purchase tools, acetylene and oxygen, and to pay for the moving of the boiler and frame, yet to come. We were recently saddled with an unexpected asbestos abatement fee, were it hadn't been removed by a crew in the 1980s. Still, today the locomotive is entirely clean, and done so to meet all safety requirements.
It will take about three weeks to get the movers and cranes in place. Expect the completion of 470's next trip to Washington Junction yard in the second week of August.
These are pictures of the asbestos abatement crew's setup at 470 yesterday. These guys have to wear containment suits inside these greenhouses!
AC Electric Corporation has made some progress on 470's Sunbeam Turbo Generator! Here's the recently rewound armature, ready to have the commutator slits cut next week.
Thanks to everyone that came out for our Touch-A-Train event on Saturday, June 11, 2016! We drew in 730 people/families, and we had outstanding help and support from Downeast Scenic Railroad. Governor's also gave us the usual fine support they always offer, and PERC Waste to Energy provided both the whistle and set-up for a really unique but popular chance for kids to experience something truly memorable. Whited Ford also loaned us a Peterbilt truck which was a big hit!
The fund to restore the tender of locomotive 470 received a boost with a donation of $2,500, courtesy of Mr. Andrew Jones, representing the Deupree Family Foundation. The Deupree Family Foundation has be a strong supporter of New England Steam since our first application, in 2014. Mr. Jones and other donors of $250 or more to the tender or boiler funds, will receive our new enameled pin bearing a likeness of 470 under her protective shelter, with the title "Restoration Supporter" beneath.
NESCo's "Touch-A-Train 2016" will be held in Ellsworth, ME at the Washington Junction railyard of the Downeast Scenic Railroad on Saturday, June 11, 2016 starting at 9:00 AM. This is a day for kids, grandparents, and parents to satisfy their inner train craving!
You can...
- Sit in a real diesel locomotive cab!
- Ride the caboose hop!
- Receive discounted fares for the Downeast Scenic Railroad afternoon train ride!
- Eat desserts from Governor's Restaurant!
- Ring Maine Central #470's bell and hear the whistle blow!
- Support the restoration of Maine Central #470 to operation!
There is free admission and plenty of free parking! We'll see you there!
Visit the Facebook page for this event!
On April 21, 2016, Bill Green shot a long segment at 470. They interviewed several members of NESCo, as well as our friend Kerri Marion, proving that women can like steam locomotives as much as guys do! Bill and his cameraman were very interested and got right into the mix of what we were doing.
Bill's segment is available at this link, and some photos from his visit are below!
Peter Grant of Odd Duck Foundry has cast new dogs for 470's smokebox door. Behold, the first new parts cast for 470! These were bit warm (spelled "h-o-t") when he knocked them out of the sand, but they are new iron dogs to replace those broken units on her face. These are made from 100% genuine re-cycled radiator iron. These are a bit rough still, although the original from which the pattern was made appears in one photo.
Additionally, AC Electric Corporation has started the rehab on 470's Sunbeam Turbo Generator. Check out the photos of the disassembly by clicking here!
What do these two things have in common? Not much, other than they're both things that NESCo has been working on in the past month!
First, the tender light that was repaired by donation at Forrest Autobody last year was still missing its bezel ring. Bernie Perch, a master pattern maker who performs work for the likes of the WW&F and CNJ #113, has supplied NESCO with a new pattern for this ring. The first shot is of the only portion of the bezel that survived total destruction by vandals, and the only piece Bernie had to use as a guide. The large block upon which is sits is called "the follower", and it maintains the shape of the inner ring. Peter Grant at Old Duck Foundry will be casting this first original part of our locomotive.
Second, all sizes of both the "American Made" and "Keep Calm and Steam On" shirts are back in stock, as well as "470" logo baseball caps! Shirt price is $10 for members and $20 for non-members, while hats are $10 for members and $14 for non-members. Order from the NESCo website by clicking here!
Indicates completed.
Indicates partially completed or in process.
1. Clean up tender journals and brasses
2. Disconnect tender truck safety chains
3. Disconnect tender brake rigging
4. Remove buffer wedge
5. Remove drawbar pin
6. Disconnect stoker
7. Move tender back to allow separation
8. Cut slope in coal bunker for height clearance
1. Clean cinders out of smokebox
2. Remove bolts from cylinder saddle
3. Remove bolts from 1st waist bearer
4. Remove bolts from front furnace bearer
5. Remove bolts from rear furnace bearer
6. Make locating plates for rear furnace bearer
7. Remove headlight
8. Remove generator
9. Remove safety valves
10. Remove smokebox netting
11. Disconnect reverse gear to valve gear link
12. Disconnect air lines between boiler and frame
13. Disconnect lubricator lines between boiler and frame
14. Make support brackets for ashpan
15. Remove corner pieces from ashpan
1. Label all valves on backhead and photograph
2. Disconnect valve connections from main turret
3. Remove shaft connecting reverse quadrant to reverse gear
4. Label, photograph and remove pipe from turret to feedwater control valve
5. Label, photograph and remove pipe from stoker engine control underneath cab
1. Remove admission pipes
2. Feedwater heater pipes
3. Booster piping
4. Air pump
5. Feedwater heater pump
NESCo is pleased to announce the purchase of the arch-tarp building to house locomotive 470. The structure is being constructed by Tarp-Rite Incorp., of Woodstock, New Brunswick. It will provide the first all weather shelter for the locomotive in over six decades. The arch-tarp building is designed to withstand Maine snow and wind loads, and will sit upon re-purposed cargo containers. This structure was fully underwritten with a grant from the Samuel Freeman Foundation. Additional funds will provide a servicing trench and drop-pit. The structure will be cooperatively used to service Downeast Scenic Railroad locomotive and cars as required.
What has your support brought forth in 2015? Let's recall it together:
As 2016 approaches, we continue to take advantage of this unusual weather to prepared 470 to be moved in the summer. We are disengaging pipes, removing appliances, labeling, color coding, photographing, and storing piping and parts. These efforts will continue through the season until winter conditions make us "take a break".
Check out some newly-unearthed photos of #470's last run on June 13, 1954!
New England Steam Corp.
a 501(c)(3) non-profit organization
P.O. Box 302
Winterport, ME 04496
Website by The Garbely Publishing Company
